Power Button Flash Mic Flex Cable Compatible with iPhone 11 6.1 Inch - On Off Rear Flash Microphone Ribbon with Pre-Installed Bracket - No Soldering

Package Contents: 1x Power Button Flex Cable (Assembled with flash light) Compatible with iPhone 11 (6.1 inch) (Model: A2111 A2221 A2223)

• ADDRESSES POWER, FLASH & MIC FAULTS: If the power button stops responding, the rear flash no longer fires, or the mic path on this flex fails, this ribbon is the primary suspect. It targets those functions only — not the volume buttons or mute switch.
• PRE-INSTALLED METAL BRACKET — LESS FIDDLING: The tiny metal retaining bracket is already mounted on the flex. You skip the hardest, most drop-prone step of the repair and seat the assembly straight into place — a real time-saver noted by technicians who install these regularly.
• NO SOLDERING IRON REQUIRED: The flex connects to the logic board through a snap-down FPC connector. No solder joints to make, no board-level rework — align the connector, press it down, and confirm the buttons click before you reseal.
• BUILT FOR iPhone 11 (6.1") ONLY: Machined to the A2111 / A2221 / A2223 frame — screw holes, connector position, and button travel are matched to the required layout. Parts cut for other models sit proud of the frame and cause mushy or stuck buttons, so confirm your model before ordering.
• DIAGNOSE BEFORE YOU OPEN THE PHONE: (1) Test the power key, flash, and mic symptom separately. (2) Force-restart to rule out a software freeze. (3) If volume or mute is the only failed control, choose the separate side-control flex instead.